Custom Heads

Also available in: Spanish

Also available in: Spanish

Custom Built Fixed Pattern Drill, Ream and Tap HeadsContact Us For A No-Obligation Quotation Today! Special Patterns Are No Problem for AutoDrill.

Multiple Spindle Heads for drilling, tapping, reaming, polishing and brush turning, product spinning, etc. can often be made to the exact pattern and custom design you desire.

AutoDrill has customers using custom multi-drill heads all over the globe. In some cases, the heads were made with as many as 36 spindles. The most common design is a four spindle drill head but AutoDrill will make a single off-set head or a head with as many spindles as you need.  The best way to find out if your application can benefit from an many spindle aggregate head is to CONTACT US and talk to one of our application engineers. If we can help you, we will provide a quotation to you with no obligation whatsoever.

Fixed heads are available in ER8, ER11, ER16, ER20, ER25, ER32, ASA (automotive), Male Jacobs Taper, motor shaft as well as many other spindle styles.

Below Are Some Examples of Custom Multiple Spindle Drill Head Applications:



These ER32 Heads are Rated for Wood or Metal Use

ER32 Drilling Heads Mounted onto C-Face Motors


Four Spindle Head With Guide Rod Stabilization

Four Spindle Drill Head with Optional Guide Rods


Large Multi-Drill Head (For Pilot Bonding Brush or Similar Application)

Need Lots of Spindles? No Problem... (For Pilot Bonding Brushes)



Please CONTACT US to discuss your application and receive prompt product cost, literature and technical help.